Guaranteeing the highest quality products has always been our pursuit

Copper Alloy Castings For Heavy Trucks

  • Copper Alloy Castings For Heavy Trucks
  • Copper Alloy Castings For Heavy Trucks
Copper Alloy Castings For Heavy Trucks
  • Yaojia
  • china
  • 25 days
  • 3 Million Tons

Yaojia Trading specializes in precision copper alloy castings designed to meet the extreme mechanical, thermal, and corrosive challenges faced by heavy trucks.

Copper Alloy Castings for Heavy Trucks – Built for the Long Haul

One problem we hear from fleet operators and heavy truck OEMs

A‍‌‍‍‌ heavy truck rarely enjoys an easy working life. One type runs primarily on highways. This involves a lot of kilometers covered with the truck loaded heavily. Others are working on construction sites, mines, ports, or roads with bad surfaces. In these environments, dust, vibration, water, mud, and frequent braking are just part of the daily grind. If anything breaks down, the downtime is costly. The truck sitting in the shop does not bring in money — besides, towing, labor, and missed delivery costs are much heavier than a spare part.

We get to understand this from fleet operators, heavy truck manufacturers, and suppliers. Even the smallest of elements can make the difference.

Copper alloy castings are being used in a number of heavy truck applications because certain Copper-based alloys provide an excellent blend of wear resistance, tensile strength, thermal conductance, and corrosion resistance. Copper alloy parts can also have stable performance when subjected to repeated operating cycles which makes them ideal for certain applications.

The Yaojia approach:

We produce custom copper alloy castings to supply commercial and heavy truck systems. The customer might require further machining from a casting, so the product might range from semifinished castings to fully ready-to-use finished parts, depending on the customer's drawing and manufacturing specification.

Much more than a casting, our component is made for the long haul.

Cast Copper Alloy

Technical specifications

ParameterSpecification
Copper alloysC93700 (high-leaded tin bronze), C95500 (aluminum bronze), C86300 (manganese bronze), CuNi2Si
Tensile strength450–750 MPa, alloy dependent
Yield strength200–550 MPa
Elongation8–20%
Hardness150–280 HB (Brinell)
Thermal conductivity40–100 W/(m·K)
Casting processesSand casting, centrifugal casting, continuous casting
Maximum part weightUp to 80 kg per casting
Dimensional toleranceCT7–CT10, ISO 8062
Pressure & leak testingUp to 30 bar for hydraulic/pneumatic applications


The locations where copper alloy castings are used in heavy truck systems


Brake systems and pneumatic parts:&space;Valve bodies, compressor liners, pneumatic control components, air-management hardware, wear-sensitive brake components

Cooling systems and thermal management:&space;Oil cooling assemblies, heat-transfer components, EGR systems, various cooling systems related components

Electrical starting systems:&space;components of starter motors, grounding systems, alternators, electrical connections, carrying structures supporting the power flow


The reason copper alloys keep being part of a heavy truck's parts


The benefits for these types of components are often:


  • Favorable wear resistance of moving parts

  • Possibility of good heat dissipation

  • Resisting moisture as well as many other working environments

  • Persistence and evenness of properties regardless of several temperature cycling

  • Good machinability for surfaces

  • Viable for sliding and rotating applications

  • Materials' ability of being cast and machined


The thing to note is:

A material choice should initially be guided by the actual condition to operate in—load level, speed, temperature, presence and nature of the lubricant, pressure, corrosion exposure, and anticipated ‍‌‍‍‌lifespan.

Quality control — our 5-step inspection process

For heavy truck copper alloy castings, quality control is built into every stage of production. We follow a structured inspection process that ensures every part meets drawing requirements before it ships.

StepInspection stageWhat we checkMethodControl standard
1Incoming material verificationMaterial grade, dimensionsSpectrometer, micrometer100% traceability; dimensions within tolerance
2First-article inspectionFull dimensional check on first castingCMM, thread gauges, hardness testerAll features per drawing
3In-process inspectionCritical dimensions, casting qualitySampling, visual inspectionKey features checked per control plan
4Final dimensional inspectionFull dimension check on finished partCMM, profilometer, hardness tester100% critical dimensions verified
5Final visual & documentation reviewSurface finish, coating, packagingVisual inspectionZero defects; all documentation complete

Key inspection equipment: CMM, hardness tester, spectrometer, pressure test equipment, visual inspection stations

What we deliver: Material certificates, dimensional reports, CMM data, hardness test results, pressure test reports, full traceability, customer-specific documentation


Supporting‍‌‍‍‌ new truck programs and replacement parts


A heavy truck part does not always originate from a new vehicle program. For example, some vehicle users are still developing new chassis and need parts for prototypes. In addition, there are the ones with their vehicles already in service but who need replacement parts that have become hard to get.

Yaojia helps in the following areas:

  • Casting of prototype parts

  • Sample development

  • Design review

  • Low-volume production

  • Mass production of castings

  • Replacement components

  • CNC machining

  • Dimensional inspection



Ordering and delivery


To receive a quotation, you should send us the following:

  • 2Ddrawing, 3D CADmodel, or physical sample

  • Material specification and grade

  • Necessary quantity

  • Machining and surface treatments requested

  • Inspection and/or certification requirements

  • Delivery schedule

Min. Order Qty: Standard production is 50 pieces. Prototype and small quantities may be negotiated.

Payment: 30% deposit; the remaining after inspection video (T/T).

Shipping: FCL or LCL. Safe packaging and reinforced boxes can be offered.

Lead time: Usually, it takes 15-25 working days to finish standard production. Complex geometries and special materials can require 25-40 working days. We agree on the lead time precisely when you place the ‍‌‍‍‌order.



Warranty

We‍‌‍‍‌ are responsible for 12 months from the time of delivery. If a part fails due to manufacturing defects like - Casting defect, machining error, wrong materials - we replace the part or give credit. Wear parts, broken impact part or modified ones from delivery? Not covered.

We give straight answers whether the warranty is applicable or not.

For making claims, you can send us images of the part, the part number, and the order number. After that we will respond within 48 hours.

If a production batch is faulty, we remould the batch keeping all the standards in the original work same, like drawing, material and tolerance.

If you have any questions? About materials, specifications, machining instructions, drawings, etc., we directly respond to you. Never a dead ‍‌‍‍‌end.

Truck Casting Parts

About Yaojia Trading

Luoyang Yaojia Trading Co., Ltd. has over 20 years of practical experience in casting and metal component manufacturing. The company was founded by Mr. Xi Xianmin, who has more than 25 years of experience in foundry production and engineering management.

Our capabilities:

  • 18,000m² modern production base

  • ~68 employees

  • 16-person R&D team with two senior engineers

  • Annual casting and machining capacity:15,000 tons

  • IATF 16949 quality management certification

Integrated services:

  • Copper alloy casting (sand, centrifugal, continuous)

  • Multi-axis CNC machining

  • Heat treatment

  • Surface treatment and coating

  • Inspection and CMM

  • Pressure testing

  • Supply-chain coordination

Customers & markets:

  • Tier 1 supplier to BYD, Chery, Great Wall Motors

  • Heavy truck OEM supply

  • Aftermarket replacement parts

  • Products exported to South Korea, Japan, USA, Australia, Germany

  • Copper Alloy Castings

Exhibition

In May 2024, Yaojia Trading exhibited at the China International Foundry Technology and Equipment Exhibition in Shanghai, showcasing casting accuracy and comprehensive industry-chain service capabilities.

Cast Copper Alloy

FAQ

Q1: How do I know which copper alloy is suitable for my heavy truck part?

The choice depends mainly on operating conditions — mechanical load, temperature, wear, corrosion, conductivity, and required service life. These requirements are reviewed before the alloy is finalized.

Q2: What affects lead time?

Tooling requirements, casting complexity, machining scope, inspection requirements, and order quantity.

Q3:‍‌‍‍‌ Are you international?

Sure thing! We export components and accessories not only to North America and Europe, but also to South America and the Far East through several overseas warehouses. In fact, our customer base has been expanding globally with different partners.

Q4: What is your lead time?

Lead time of standard items: 15-25 working days

Lead time of customized orders: 25-40 working days

Production schedule will be confirmed when we take your order.

Q5: What is your MOQ?

A minimum of 50 units is usually required for standard run.

For prototypes and small quantities we are also able to help out.

Q6: What is your annual production capacity?

Our yearly production capability is 15,000 tons by means of casting and CNC machining.

Q7: What certificates do you have?

IATF16949;

We supply parts to BYD, Chery, Great Wall Motors as Tier 1 suppliers.

Q8: Can vous fornire piece finie?

We can, too! Just let us know either you want a casting or fully machined and finished ‍‌‍‍‌part.

Q9: What NDT capabilities do you have?

Pressure testing, dimensional inspection, material verification, and other tests as required.

Q10: Can you support prototype development for new truck programs?

Yes. Prototypes, samples, and validation parts are supported before regular production.

Four questions to ask any heavy truck copper alloy casting supplier

  1. What copper alloys do you recommend for brake and pneumatic applications?

  2. What pressure testing and inspection documentation do you provide?

  3. Can you supply both castings and fully machined finished parts?

  4. Do you have experience with similar heavy truck components?

We have answers ready. Ask us.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right