Guaranteeing the highest quality products has always been our pursuit

Other Copper Alloy Castings & Cast Components

  • Other Copper Alloy Castings & Cast Components
  • Other Copper Alloy Castings & Cast Components
  • Other Copper Alloy Castings & Cast Components
Other Copper Alloy Castings & Cast Components
  • Yaojia
  • china
  • 25 days
  • 3 Million Tons

Yaojia​‍​‌‍​‍‌ Trading is specialized in casting various copper alloy metal components and designing and producing them for use in diverse ​‍​‌‍​‍‌industries.

Custom Copper Alloy Castings – Engineered for Performance, Not Just Price

One issue that frequently comes up with engineers and procurement teams

Material‍‌‍‍‌ issues? Changing the alloy might be the key. At the same time, however, changing the material after the machinery has been put into operation can imply the use of new dies, testing, qualification procedures, and production ‍‌‍‍‌interruptions. Choosing an improper alloy for an application may result in excessive wear, overheating, poor conductivity, or corrosion.

We keep getting it from engineers, quality inspectors, as well as procurement specialists throughout the manufacturing equipment, electrical systems, and power industries. The choice of a suitable copper alloy from the very first steps - not after the problems have been found, is, however the main factor leading to the proper and consistent performance of components.

Our way of doing it at Yaojia:

Yaojia has done many successful casting projects in many different industrial fields. We always make sure that the right copper alloy is selected through the analysis of actual service conditions and materials requirements at the pre-production stage. With factors such as load, temperature, friction, corrosion resistance, conductivity and service life taken into account, we give advice on the alloy choice to our clients, and provide them with casting, machining and finishing, all done under one roof.

The casting is just the starting point. We create the complete solution that works under your actual ‍‌‍‍‌conditions.

Copper Alloy Castings

Technical specifications

ParameterSpecification
Copper alloysC17200 (beryllium copper), C18150, C18200, C18700, and custom alloys
Tensile strength350–900 MPa, alloy and heat-treatment dependent
Yield strength250–750 MPa
Electrical conductivity20–85% IACS
Thermal conductivity60–350 W/(m·K)
Hardness80–300 HB
Casting processesSand casting, investment casting, centrifugal casting, continuous casting
Typical weight range0.1–150 kg per piece
Dimensional toleranceCT6–CT10, ISO 8062
Post-casting processingHeat treatment, machining, plating, polishing, assembly


Applications‍‌‍‍‌ of copper alloy castings


Generally, copper alloys are used in applications where a mix of different property combinations is required, which is difficult to obtain with conventional materials.

Electrical components:_connector bodies, busbarsupports, pointed contacts, electrical conductor housings, thermal components

Wear-resistant parts:_linings, guide sleeves, disc wear plates, bearing parts, die-casting inserts

Thermal and fuel equipment:

Heat-exchanger parts, furnace fixtures, cooling system parts, thermal components

Industrial tools:Valve components mechanical guidances assembling rolls cotton machine parts, printing components ‍‌‍‍‌

Quality control — our 5-step inspection process

For copper alloy castings, quality control is built into every stage of production. We follow a structured inspection process that ensures every part meets drawing requirements before it ships.

StepInspection stageWhat we checkMethodControl standard
1Incoming material checkClassification‍‌‍‍‌ of the material, size of the pieceUsed equipments: spectrometer, micrometer100% traceability; measurements do not exceed the tolerance limits ‍‌‍‍‌
2Initial‍‌‍‍‌ article inspectionChecking all dimension of the first castingCMM, thread gauges, hardness testerCompletely conforming to all features of the ‍‌‍‍‌drawing
3In-process inspectionMeasuring most important dimensions and casting qualityPicking random items and seeing the productsThe essential features are verified in accordance with the control ‍‌‍‍‌plan
4Final‍‌‍‍‌ verification of part dimensionsInspection of all major dimensions of the finished componentCMM, profile meter, hardness testerComplete‍‌‍‍‌ dimensions ‍‌‍‍‌validated
5Final‍‌‍‍‌ visual & documentation examinationAppearance, coating and packingQuality controlNo defects; all documentation ‍‌‍‍‌submitted

Essential‍‌‍‍‌ inspection tools: CMM, hardness tester, spectrometer, conductivity tester, visual inspection stations

Packages we send: Material certificates, dimensional reports, CMM data, hardness test results, conductivity test results, complete traceability, customer-specific documentation


Metal‍‌‍‍‌ selection based on usage conditions

You will only be able to save money by going for cheaper parts, if they last long enough to be worth your while. If you replace them very frequently it's almost like you're just throwing the extra money ‍‌‍‍‌out. Frequent breakdown, operating at high temperature or overheating are reasons which maintenance and downtime costs may even exceed what you have saved by selecting cheaper material.

We study:

  • Loads the component is exposed to

  • Operational temperature

  • Wear conditions

  • Types of corrosion

  • Electrical and thermal requirements

  • Necessary service life

Target:

Select material matching the part usage - price should be the secondary factor only.


Prototype and serial production


Yaojia can help you with:

  • Prototype casting pieces

  • Engineering samples

  • Initial production runs

  • Nice to know, very little manufacturing

  • Mass ‍‌‍‍‌production

Ordering and delivery

Cast Components

To‍‌‍‍‌ get a quotation, we need the following:

  • 2D drawing, 3D CAD model, or a sample

  • Specifying what kind of material and how pure (or if alloy must be selected based on working conditions)

  • Quantity needed

  • Machining and surface treatment

  • Inspection or certifications requirements

  • Delivery schedule expectations

Minimum Order Quantity: 50 pieces for mass production. We can agree on the quantities of samples and small series.

Prepayment: 30%; remaining after inspection video (T/T).

Sea freight: Full container and Less than container load (LCL) are possible. Packages with protective material and reinforced boxes.

Production time: Regular production: 15-25 working days, if needed to produce with difficult geometries or special materials: 25–40 days. The exact lead time is confirmed after receiving the ‍‌‍‍‌order.

Warranty

We‍‌‍‍‌ are responsible for 12 months from the time of delivery. If a part fails due to manufacturing defects like - Casting defect, machining error, wrong materials - we replace the part or give credit. Wear parts, broken impact part or modified ones from delivery? Not covered.

We give straight answers whether the warranty is applicable or not.

For making claims, you can send us images of the part, the part number, and the order number. After that we will respond within 48 hours.

If a production batch is faulty, we remould the batch keeping all the standards in the original work same, like drawing, material and tolerance.

If you have any questions? About materials, specifications, machining instructions, drawings, etc., we directly respond to you. Never a dead ‍‌‍‍‌end.

About Yaojia Trading

Luoyang Yaojia Trading Co., Ltd. has over 20 years of practical experience in casting and metal component manufacturing. The company was founded by Mr. Xi Xianmin, who has more than 25 years of experience in foundry production and engineering management.

Our capabilities:

  • 18,000m² modern production base

  • ~68 employees

  • 16-person R&D team with two senior engineers

  • Annual casting and machining capacity:15,000 tons 

  • IATF 16949 quality management certification

Integrated services:

  • Copper alloy casting (sand, investment, centrifugal, continuous)

  • Multi-axis CNC machining

  • Heat treatment

  • Surface treatment and coating

  • Inspection and CMM

  • Conductivity and mechanical testing

  • Supply-chain coordination

Customers & markets:

Copper Alloy Castings

  • Tier 1 supplier to BYD, Chery, Great Wall Motors

  • Automotive OEM supply

  • Industrial equipment, electrical systems, energy sectors

  • Products exported to South Korea, Japan, USA, Australia, Germany

Exhibition

In May 2024, Yaojia Trading exhibited at the China International Foundry Technology and Equipment Exhibition in Shanghai, showcasing casting accuracy and comprehensive industry-chain service capabilities.

Cast Components

FAQ


Q1:‍‌‍‍‌ How do I know which copper alloy is suitable for my part?

For the most part, one determines the appropriate material by knowing the operating conditions—the mechanical stress, heat, abrasion, chemical attack, conducting, and the life expectancy.

The main factors that determine whether a particular copper alloy is suitable for the product are conditions such as mechanical load, temperature, abrasion, corrosion, conductivity, and the lifetime.

Q2: Will you manufacture according to drawings provided by a customer?

Absolutely. We can make the part either from drawings, customer's CAD files, technical drawings or even by copying a physical object.

Q3: Is there any possibility to machine copper alloy castings post-casting?

Certainly, machining can also be done as an auxiliary to the casting operation by dimensionally adjusting the workpiece through removal of materials in order to punch holes, create threads, smooth sealing faces, and produce other functions needed for assembly.

Q4: Do you support our prototype and small order quantity needs?

Not only mass production but prototype samples and small quantity orders can also be produced by ‍‌‍‍‌us.

Q5: Can the chemical composition be customized?

If none of the standard grades can give the required level of performance, we can consider developing a tailor-made alloy solution.

Q6: What details should one send for requesting a quotation?

We will need to have the drawing or the CAD file, material specifications, dimensions, expected quantity of purchase, operational conditions, machinability requirements, etc.

Q7: Which sectors make use of copper alloy castings?

Machine tools, power generation apparatus, electric gadgets, transportation devices, ship components, watercraft items, and engineering systems at large.

Q8: How do you ensure high-quality castings?

We carry out dimensional examination, chemical composition analysis, testing for mechanical properties, conductivity assessments, non-destructive evaluation methods, and traceability of material and processes is always ensured through proper documentation.

Q9: On average, in how many days can you deliver the goods?

Pipeline work is about 15–25 working days and special orders take about 25–40 working days. Once a confirmed order comes in, that's the lead time.

Q10: What is your minimum order?

The standard minimum production runs to 50 pieces. However, for prototypes or small orders, there should be at least 40 pieces on the order form.

Q11: What is your annual output?

One million and five hundred thousand tons annually, of which about half goes for the manufacturing of castings while the other half gets devoted to the CNC machining activities.

Q12: What quality standards do you comply with?

Our main certification is IATF 16949. BYD, Chery, and Great Wall Moters recognize us as Tier 1 ‍‌‍‍‌supplier.


Four questions to ask any copper alloy casting supplier

  • What copper alloys would you suggest for my situation and what is your reasoning?

  • What kinds of conductivity and mechanical tests can you do?

  • Can you do casting, machining, and finishing all under one production line?

  • Have you handled copper alloy parts that match the requirements of my project?

We are always prepared to help. Feel free to ask us. ‍‌‍‍‌



Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right