Guaranteeing the highest quality products has always been our pursuit

Copper Alloy Castings For Agricultural Machinery

  • Copper Alloy Castings For Agricultural Machinery
Copper Alloy Castings For Agricultural Machinery
  • Yaojia
  • china
  • 25 days
  • 3 million tons

Yaojia Trading provides high-performance copper alloy castings designed to meet the demanding conditions of modern agricultural equipment.

Copper Alloy Castings for Agricultural Equipment – Built for the Season

One problem we hear from agricultural equipment manufacturers and farmers

Downtime‍‌‍‍‌ is one of the worst things that can happen to farming - it never comes during a handy moment. A part failure can mean a disaster during the planting season, but not only planting, irrigation breakdown would be another reason crops only have rain to depend on for water. A harvester in the repair shop can't prevent the weather from changing so if the crop requires timely harvesting you could be at their mercy if the decision went wrong, a whole season would be gone.

Our agricultural equipment OEMs, dealers, and farmers tell us that even a small failure in the part while the season is still very intense can have very high cost to farmers. Components of machines that work in water, fertilizer, hydraulic oil, and continuous movement have to withstand a harsh environment that far exceeds even that of the most tough industrial manufacturing environment.

Coppers alloys are still one of the most widely used materials in these situations because they resist corrosion well, wear well and have a long life in the field, a single material that can do all of these.

The Yaojia solution:

Our copper alloy castings are made to suit components of farm machine, such as parts of irrigation systems, harvesters, hydraulic parts and power transmission parts etc...

We deliver not just castings, but full component ready for use in season.

Copper Alloy Castings

Technical specifications

ParameterSpecification
Copper alloysC83600 (leaded tin bronze), C90300 (tin bronze), C95500 (aluminum bronze), CuZn40Mn1Pb (manganese brass)
Tensile strength320–680 MPa
Yield strength150–450 MPa
Elongation8–25%
Thermal conductivity40–120 W/(m·K)
Corrosion resistanceExcellent resistance to fresh water, fertilizers, and mild agrochemicals
Casting processesSand casting, centrifugal casting, continuous casting
Max. part weightUp to 50 kg (single casting)
Surface roughnessAs-cast Ra 6.3–12.5μm, machined Ra 1.6–3.2μm
Pressure integrityHydraulic testing up to 25 bar


Typical application of copper alloy castings


Irrigation equipment: Valve bodies, pump housings, water distribution components, manifolds, flow-control assemblies

Spraying and chemical handling systems: Spray-system pumps, regulator housings, nozzle assemblies, chemical-control valves, fluid connectors

Harvesting equipment: Bronze bushings, bearing housings, sleeves, wear plates, motion-control components

Tractor and hydraulic systems: Hydraulic valve components, PTO-related parts, coupling assemblies, power-transmission components, support structures


The Reasons Why Copper Alloys Remain Choice for Farming Equipment


In farming, equipment is mostly operated outdoor. The material must perform in real conditions, not just on paper.

Copper alloys provide:


  • Resistance against corrosion and moisture

  • Consistently good performance

  • Less chances for metal parts to fail, seize up, or stick together

  • Predictable movements and actions through parts

  • Easy to work with

  • Very durable in conditions on a farm


These qualities mean longer intervals between maintenance and a lot less need for replacement of components.


Quality control — our 5-step inspection process

For agricultural copper alloy castings, quality control is built into every stage of production. We follow a structured inspection process that ensures every part meets drawing requirements before it ships.

StepInspection stageWhat we checkMethodControl standard
1Incoming material verificationMaterial grade, dimensionsSpectrometer, micrometer100% traceability; dimensions within tolerance
2First-article inspectionFull dimensional check on first castingCMM, thread gauges, hardness testerAll features per drawing
3In-process inspectionCritical dimensions, casting qualitySampling, visual inspectionKey features checked per control plan
4Final dimensional inspectionFull dimension check on finished partCMM, profilometer, hardness tester100% critical dimensions verified
5Final visual & documentation reviewSurface finish, coating, packagingVisual inspectionZero defects; all documentation complete

Key inspection equipment: CMM, hardness tester, spectrometer, pressure test equipment, visual inspection stations

What we deliver: Material certificates, dimensional reports, CMM data, hardness test results, pressure test reports, full traceability

Ordering and delivery

Agricultural Machinery

To get a quote, send us:

  • 2D drawing, 3D CAD model, or physical sample

  • Material specification and grade

  • Quantity required

  • Machining and surface treatment requirements

  • Inspection or certification requirements

  • Delivery schedule expectations

MOQ: 50 pieces for standard production. Prototype quantities and small batches can be discussed.

Payment: 30% deposit; balance after inspection video confirmation (T/T).

Shipping: FCL or LCL available. Protective packaging and reinforced crates.

Lead time: Standard production: 15–25 working days. Complex geometries or special materials: 25–40 working days. We confirm exact lead time at order placement.


Warranty

We‍‌‍‍‌ are responsible for 12 months from the time of delivery. If a part fails due to manufacturing defects like - Casting defect, machining error, wrong materials - we replace the part or give credit. Wear parts, broken impact part or modified ones from delivery? Not covered.

We give straight answers whether the warranty is applicable or not.

For making claims, you can send us images of the part, the part number, and the order number. After that we will respond within 48 hours.

If a production batch is faulty, we remould the batch keeping all the standards in the original work same, like drawing, material and tolerance.

If you have any questions? About materials, specifications, machining instructions, drawings, etc., we directly respond to you. Never a dead ‍‌‍‍‌end.



About Yaojia Trading

Luoyang Yaojia Trading Co., Ltd. has over 20 years of practical experience in casting and metal component manufacturing. The company was founded by Mr. Xi Xianmin, who has more than 25 years of experience in foundry production and engineering management.

Our capabilities:

  • 18,000m² modern production base

  • ~68 employees

  • 16-person R&D team with two senior engineers

  • Annual casting and machining capacity:15,000 tons 

  • IATF 16949 quality management certification

Integrated services:

  • Copper alloy casting (sand, centrifugal, continuous)

  • Multi-axis CNC machining

  • Heat treatment

  • Surface treatment and coating

  • Inspection and CMM

  • Pressure testing

  • Supply-chain coordination

Customers & markets:

  • Tier 1 supplier to BYD, Chery, Great Wall Motors

  • Agricultural equipment OEM supply

  • Aftermarket replacement parts

  • Products exported to South Korea, Japan, USA, Australia, Germany

Exhibition

In May 2024, Yaojia Trading exhibited at the China International Foundry Technology and Equipment Exhibition in Shanghai, showcasing casting accuracy and comprehensive industry-chain service capabilities.

Copper Alloy Castings

FAQ

Q1: How do I know whether the copper alloy is right for my part?

Material choices depend on temperature, friction, possibility of being corroded and, what life one expects of the material, before a part fails. All these factors need to be looked at before choosing an alloy.


Q2: Don't you only use copper alloy castings in electronic systems?

Nope. Even though conductivity is a feature associated with them, lots of copper alloys are preferred for the combination of qualities like wear resistance, thermal conductivity, and resistance to corrosion, not electrical conductivity.


Q3: Is copper alloy casting subject to post-casting machining?

Absolutely. Many parts require machining after casting to reach the desired size, create the mating faces for assembly, and provide sealing surfaces.


Q4: Are you able to handle prototype development?

We can. It is common to start with prototyping to ensure the part works, see which materials are the best fit, and get a grip on what the production process will look like before going into full-scale production.


Q5: Can I have a custom design for the alloy?

We can. When standard grades don't meet your performance requirements, the alloys can be adjusted to meet your targets.


Q6: What is your lead time on average?

We normally take between 15 to 25 days (working) to complete your order. 25 to 40 days for complex parts. Exact time confirmed at ordering.


Q7: How much is your minimum order qty?

It's 50 pcs for regular production. You can discuss prototypes and few quantities with us.


Q8: What is your year volume?

We can handle up to 15,000 tons annually on casting works and CNC machining.


Q9: Which certificate holds you?

We are accredited as per the IATF 16949 standards. The companies that purchase from us include Chery, Great Wall Motors, as well as the suppliers for BYD


Q10: What kinds of agriculture sectors are you supplying?

We mainly provide components for the irrigation, spraying/chemical application, harvesters, as well as tractors and hydraulic machinery ‍‌‍‍‌systems.


Four questions to ask any agricultural copper alloy casting supplier

  1. What copper alloys do you recommend for fertilizer and chemical exposure?

  2. What corrosion testing and documentation do you provide?

  3. Can you produce replacement parts for older equipment without drawings?

  4. Do you have experience with similar agricultural components?

We have answers ready. Ask us.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right