Aluminum Castings For Automotive Parts
- Yaojia
- china
- 25 days
- 3 Million Tons
Yaojia Trading specializes in precision aluminum castings designed to meet the evolving demands of automotive innovation. Our components deliver the optimal balance of weight reduction, structural integrity, and thermal efficiency—supporting electrification, fuel economy, and enhanced driving dynamics.
Aluminum Castings for Automotive Applications – Consistent, Lightweight, Proven
One problem we hear from automotive engineers and procurement teams
"Automotive programs rely on consistency and also need lightweight materials. Weight reduction only is not sufficient. One part could reduce the weight of the whole thing by several kg, but if it dimensional variations cause assembly issues, or if holes deteriorate the function, or if production runs fail to hold over the time, then the weight saving is totally meaningless."
With vehicle electrification gaining momentum and higher integration, aluminum castings are more and more essential - they combine low weight with structural strength and allow the manufacturers to flexibly produce the parts.
Yaojia solution:
We produce consistent aluminum castings used by automotive industry, and these castings are traceable and stable with regard to quality.
It is not just any one part.
Our team creates a component for a particular job. This job will require a component capable of performing exactly same function every time it is used and, with this, it will meet expectations on the level of a part that is weight efficient as well as a good functional performer.

Technical specifications
| Parameter | Specification |
|---|---|
| Material grades | A356, A380, ADC12, AlSi10Mg, and custom alloys |
| Tensile strength | 230–320 MPa (as-cast), up to 350 MPa with T6 heat treatment |
| Yield strength | 140–250 MPa (dependent on alloy and temper) |
| Elongation | 1–10% (varying by alloy and process) |
| Casting process | High-pressure die casting, low-pressure casting, gravity casting, squeeze casting |
| Dimensional tolerance | CT5–CT7 (HPDC), CT6–CT8 (LP/gravity) |
| Surface finish | As-cast Ra 3.2–6.3μm, machined Ra 0.8–3.2μm |
| Heat treatment | T5, T6, T7 options for enhanced mechanical properties |
| Leak testing | Helium/air pressure testing up to 8 bar |
The Wide Range of Applications of Vehicles
Electric car components and power systems: Battery shell structures, inverter casings, motor terminal plates, cooling system parts, power electronics supports
Components of the drivetrain: transmission casings, oil trays, engine mounting brackets, parts of turbochargers, support castings (e.g. gearboxes)
Chassis and suspension systems: Linkage parts for the front and rear steering, arms for front suspension systems (lower and upper control arms), hangers and supports for shock absorbers, subframe parts of the chassis or understructure of the vehicle, reinforcement brackets
Parts of the body of the car (i.e. those parts, which cover the car body): Cross beams, connecting hinge points, reinforced areas, fixing points, mounting holes, body section support
Thermal management units: Aluminum heat sink blocks, coolant distribution manifold, radiator cooling module, cooling system cover, thermal transfer unit
Why automotives engineers continue to widen aluminum use
You get weight savings without losing strength compared to a conventional iron casting
Multifunctional parts and shapes in a single casting
Excellent resistance to corrosion under automotive environments
High thermal conductivity makes this metal suitable to be used in heat sensitive systems
Freedom of design when working with complicated forms
Environmentally-friendly – aluminum is very easy to recycle
Oftentimes, the value that is created from consolidating several parts into one single casting can be, not only equivalent but also higher than what was saved by just the weight of the materials.
Quality control — our 5-step inspection process
For automotive aluminum castings, quality control is built into every stage of production. We follow a structured inspection process that ensures every part meets drawing requirements before it ships.
| Step | Inspection stage | What we check | Method | Control standard |
|---|---|---|---|---|
| 1 | Incoming material verification | Material grade, dimensions | Spectrometer, micrometer | 100% traceability; dimensions within tolerance |
| 2 | First-article inspection | Full dimensional check on first casting | CMM, thread gauges, hardness tester | All features per drawing |
| 3 | In-process inspection | Critical dimensions, casting quality | Sampling, visual inspection | Key features checked per control plan |
| 4 | Final dimensional inspection | Full dimension check on finished part | CMM, profilometer, hardness tester | 100% critical dimensions verified |
| 5 | Final visual & documentation review | Surface finish, coating, packaging | Visual inspection | Zero defects; all documentation complete |
Key inspection equipment: CMM, hardness tester, spectrometer, X-ray (as required), leak test equipment, visual inspection stations
What we deliver: Material certificates, dimensional reports, CMM data, hardness test results, NDT reports, leak test reports, full traceability, customer-specific documentation
Quality control and traceability
All production documents are trackable by the batch number through each stage - from materials to finished products.
Support that we can supply may consist of:
Material Certificates
Dimensional Inspection Reports
CMM verification
X-ray inspection
Process documentation
Traceability records
Project-specific quality documentation
Ordering Process and Deliveries
To get quotation, let us have:
2D drawing, 3D CAD model, or physical sample
Material specification and grade
Quantity of pieces needed
Need of machining and surface treatment
Required of inspection or certification
Delivery time frame expectations
Minimum Order Quantity: 50 Pieces for regular production. Low-volume validation and prototype quantity can also be negotiated.
Pay: Deposit amount: 30% , payment of the rest of the money (after watching the inspector video, we can confirm) by Bank transfer(T/T).
Shipping: Full container load(FCL) and less than container load(LCL) available. We have protective packaging and crates that are reinforced.
Shipping duration: Regular production: 15-25 business days. Complex geometries or special materials: 25-40 business days. The lead time will be given at the moment of placing an order.
Warranty
We are responsible for 12 months from the time of delivery. If a part fails due to manufacturing defects like - Casting defect, machining error, wrong materials - we replace the part or give credit. Wear parts, broken impact part or modified ones from delivery? Not covered.
We give straight answers whether the warranty is applicable or not.
For making claims, you can send us images of the part, the part number, and the order number. After that we will respond within 48 hours.
If a production batch is faulty, we remould the batch keeping all the standards in the original work same, like drawing, material and tolerance.
If you have any questions? About materials, specifications, machining instructions, drawings, etc., we directly respond to you. Never a dead end.

About Yaojia Trading
Luoyang Yaojia Trading Co., Ltd. has over 20 years of practical experience in casting and metal component manufacturing. The company was founded by Mr. Xi Xianmin, who has more than 25 years of experience in foundry production and engineering management.
Our capabilities:
18,000m² modern production base
~68 employees
16-person R&D team with two senior engineers
Annual casting and machining capacity:15,000 tons
IATF 16949 quality management certification
Integrated services:
Aluminum casting (HPDC, low-pressure, gravity, squeeze)
Multi-axis CNC machining
Heat treatment (T5, T6, T7)
Surface treatment and coating
Inspection and CMM
NDT (X-ray as required)
Leak testing (helium/air)
Supply-chain coordination
Customers & markets:

Tier 1 supplier to BYD, Chery, Great Wall Motors
Automotive OEM supply
Electric vehicle platforms
Products exported to South Korea, Japan, USA, Australia, Germany
Exhibition
In May 2024, Yaojia Trading exhibited at the China International Foundry Technology and Equipment Exhibition in Shanghai, showcasing casting accuracy and comprehensive industry-chain service capabilities.

FAQ
Q1: Is aluminum castings besides light, also weaker than other metals that could be stronger?
Not quite so. If done with right alloy and proper design, they can perform structural functions and still enable considerable weight savings.
Q2: Which ones are vehicle systems that most often use aluminum castings?
Power-train, body suspension, cabin, pneumatic systems, EV platforms - these are the main users of aluminum castings.
Q3: Are you involved in EV projects?
Indeed. Our manufacturing covers parts relating to electrification such as battery systems components, motor housings, cooling assemblies.
Q4: Can parts be delivered in finished condition?
Yes. As-cast, semi-machined, fully-machined. Your decision depending on project requirements.
Q5: Are you making pilot lots?
Yes. Low-volume validation and pilot project products are frequently delivered.
Q6: How do you maintain good quality of the product ?
We use dimensional control, material test report, X-ray, coordinate measuring machine, client’s requirements and other necessary methods.
Q7: What is the usual time for production?
Average production: 15–25 working days. Complex work: 25–40 working days. Lead time will be confirmed when we receive your order.
Q8: What do you take as the smallest amount?
Min.: 50 Pieces for regular production. Pilot and small quantity items can also be handled.
Q9: How many tons do you produce in a year?
15,000 tons per year of casting and CNC machining included.
Q10: Do you have licenses?
IATF 16949 certification in the quality management system from us.
We belong to the suppliers of the first tier to the manufacturer: BYD, Chery, Great Wall Motors.
Four questions to ask any automotive aluminum casting supplier
What aluminum alloys do you recommend for my application?
What dimensional consistency can you achieve across production batches?
What inspection and material certification do you provide?
Do you have experience with similar automotive components?
We have answers ready. Ask us.








