Guaranteeing the highest quality products has always been our pursuit

Farm Machinery High Pressure Die Castings

  • Farm Machinery High Pressure Die Castings
  • Farm Machinery High Pressure Die Castings
Farm Machinery High Pressure Die Castings
  • Yaojia
  • china
  • 25 days
  • 3 Million Tons

Yaojia Trading specializes in high-pressure die-cast components for modern farm machinery, designed to deliver consistent performance under tough field conditions.

Aluminum Die Castings for Agricultural Equipment – Simplify Assembly, Reduce Weight

One problem we hear from agricultural equipment manufacturers

Manufacturing‍‌‍‍‌ of agricultural machines is evolving. Machine builders are not just paying attention to the strength factor - they are also seeking to simplify assembly, reduce part numbers, and improve the manufacturing process in parallel without raising the overall production cost.

These are the statements we receive from the agricultural equipment OEMs, engineers, and producers alike. One of the most notable reasons is that a good die casting design would eliminate quite a few weld, machine or fabricated parts that used to need several different manufacturing sequences. The result of this substitution would not be the only benefit, since fewer parts will mean a lot of savings - for example, fewer fasteners and fewer assembly operations along - and also fewer chances for production errors.

Apart from all these advantages, this is probably the reason why aluminum diecastings become so popular in agricultural machinery as well:

Yaojia's Way:

We produce aluminium die cast parts for farm machine where the repetition factor, dimensional consistency, and production efficiency are major considerations.

Not only a cast part but also a one-piece construction that makes assembly easier for the customer.

Agricultural Equipment Parts

Technical specifications

ParameterSpecification
Primary alloysA380, ADC12, A383, AlSi9Mg, and custom high-strength variants
Tensile strength240–320 MPa
Yield strength140–220 MPa
Elongation2–6%
Casting processHigh-pressure die casting (cold chamber)
Part weight range0.1 kg – 15 kg (per single piece)
Dimensional toleranceCT5–CT7 (ISO 8062)
Minimum wall thickness2.0mm (general), 1.5mm (optimized zones)
Surface finishAs-cast Ra 3.2–6.3μm
Porosity controlVacuum-assisted HPDC for high-integrity structural parts


Aluminum die casting examples in agricultural machinery


Harvesting equipment: Frames, wheels, doors, side panels, machine housings - lightweight cast designs make harvesters, other harvesting machines, and accessories a lighter and sturdier unit that is easy.

Planting and seeding systems: Accurate, minute-sized components for planters and seed drills manufactured in huge volumes

Hydraulic equipment: Pumps, cylinders, valves - to work smoothly, hydraulic systems need consistent dimensions and reliable sealing

  • Power transmission assemblies

  • Cast gear housing

  • Chains

  • Cutters/Sprockets

  • Tensioners

  • Spare parts to be installed in main drive systems and power transferring devices

  • Operator stations and control systems

Control handles, dashboards, cases - where you want components to be fit and finish and assembly not to take much time.


Benefits of die casting parts for equipment producers


  • Time-efficient production

  • Higher quality and consistency

  • Less waste

  • Waste-free material use

  • Enhanced machinery performance

  • Increase cost savings


For the majority of the companies, the higher the production volume, the more significant these advantages get.


Quality inspection - a 5-step process


In our case, quality inspection is part of the production process for aluminium die casting parts intended for agricultural applications, so it is present at all levels. We have established an inspection regimen that will make sure that each part will satisfy the drawing requirements.

StepInspection stageWhat we checkMethodControl standard
1Incoming material verificationMaterial grade, dimensionsSpectrometer, micrometer100% traceability; dimensions within tolerance
2First-article inspectionFull dimensional check on first castingCMM, thread gauges, hardness testerAll features per drawing
3In-process inspectionCritical dimensions, casting qualitySampling, visual inspectionKey features checked per control plan
4Final dimensional inspectionFull dimension check on finished partCMM, profilometer, hardness tester100% critical dimensions verified
5Final visual & documentation reviewSurface finish, coating, packagingVisual inspectionZero defects; all documentation complete

Primary inspection tools are CMM, hardness tester, spectrometer, X-ray (in case it is needed), and visual inspection stations.

Documentation delivered: certificates for materials, dimensional reports, reports showing the results of our hardness testing, CMM data, NDT, etc.


Request a quote


To obtain a proposal from us:

  • Send 2D drawing, the corresponding 3D CAD model or a working sample

  • Material specification and grade

  • Needed quantity

  • Detail requirements about machining and surface finishing

  • Requirements for inspection or certification

  • Expected delivery dates

MOQ: Standard orders 50 items. For prototypes and small volumes, MOQ can be arranged differently.

Pricing: 30% down payment; rest will be done with an inspection video confirmation letter (T/T).

Shipping: Options for both full-load or less than a single freight are available. Safe packaging and strong crate will be used for transporting.

Estimates: The regular production lead time is 15-25 workdays. For special designs or materials we take 25-40 days. Precise lead time will be set at the moment of ordering.


Warranty

We‍‌‍‍‌ are responsible for 12 months from the time of delivery. If a part fails due to manufacturing defects like - Casting defect, machining error, wrong materials - we replace the part or give credit. Wear parts, broken impact part or modified ones from delivery? Not covered.

We give straight answers whether the warranty is applicable or not.

For making claims, you can send us images of the part, the part number, and the order number. After that we will respond within 48 hours.

If a production batch is faulty, we remould the batch keeping all the standards in the original work same, like drawing, material and tolerance.

If you have any questions? About materials, specifications, machining instructions, drawings, etc., we directly respond to you. Never a dead ‍‌‍‍‌end.

High Pressure Aluminum Die Casting

About Yaojia Trading

Luoyang Yaojia Trading Co., Ltd. has over 20 years of practical experience in casting and metal component manufacturing. The company was founded by Mr. Xi Xianmin, who has more than 25 years of experience in foundry production and engineering management.

Our capabilities:

  • 18,000m² modern production base

  • ~68 employees

  • 16-person R&D team with two senior engineers

  • Annual casting and machining capacity:15,000 tons 

  • IATF 16949 quality management certification

Integrated services:

  • Aluminum die casting (high-pressure die casting)

  • Multi-axis CNC machining

  • Heat treatment

  • Surface treatment and coating

  • Inspection and CMM

  • NDT (X-ray as required)

  • Supply-chain coordination

Customers & markets:

Agricultural Equipment Parts

  • Tier 1 supplier to BYD, Chery, Great Wall Motors

  • Agricultural equipment OEM supply

  • Aftermarket replacement parts

  • Products exported to South Korea, Japan, USA, Australia, Germany

Exhibition

In May 2024, Yaojia Trading exhibited at the China International Foundry Technology and Equipment Exhibition in Shanghai, showcasing casting accuracy and comprehensive industry-chain service capabilities.

High Pressure Aluminum Die Casting

FAQ

Q1. What is it that the machine tool manufacturers of aluminium die casting usually do?

We have been working with a variety of alloys such as A380, ADC12, A383, AlSi9Mg, and also made our own custom high-strength aluminum grades. The choice of the合金 alloy will largely depend on the level of mechanical strength, the environment with regard to corrosion in which the casting is to be used, and the casting complexity.


Q2. Do you work according to customer drawings?

Certainly, we are able to use drawings.

The manufacturing is carried out according to the specifications from customer drawings, 3D models, or in fact by a real object specimen.


Q3. Is it possible for a die casting to go machined after casting?

Of course. Die casting parts can be delivered as-cast, semi-finished, or entirely finished as per the client needs.


Q4. Do you offer material certifications?

We do offer certificates with details on 化学组成 and reports on mechanical property, along with the traceability records.


Q5. You support prototype production and low run quantity orders?

Yes, we do. We provide design assistance at the preliminary stages and then pilot runs, low-volume batch production and long-term supply agreements can follow depending on what is best for your situation.


Q6. Which factors do set the production lead time?

Factors include tooling requirements, intricacy of casting, degree of machining, level of inspection and size of order.


Q7. What is your lead time normally?

Standard: 15–25 working days. Complex: 25–40 days. We provide actual lead time in advance.


Q8. What minimum order quantity do you accept for standard production of aluminium die castings?

We require a minimum quantity of 50 pieces for standard production orders. For prototyping and small-volume manufacturing, we can negotiate a lower MOQ.


Q9. What annual die casting and CNC machining production capacity do you have?

Our production capacity is 15 thousand tons per year covering casting and CNC machining.


Q10. Which certificates are you able to share?

Among our certifications are those of the IATF 16949 standard for quality management systems. We supply directly to several of the China's Tier 1 automotive producers - BYD, Chery, and Great Wall Motors to be specific.


Four important points to ask any aluminum die casting supplier for agricultural components

  • Which aluminum alloy recommendations would be suitable for agricultural equipment application?

  • Is it possible that multiple individual components be joined together through a unique casting process?

  • What degree of dimensional stability is your factory capable of keeping from one batch to another?

  • Have you worked on similar agricultural products before?

We have all the answers that you are looking for. Please let us know what you are looking for, and we will respond ‍‌‍‍‌accordingly!


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right