Guaranteeing the highest quality products has always been our pursuit

Cast Iron Components For Marine Pumps & Valves

  • Cast Iron Components For Marine Pumps & Valves
  • Cast Iron Components For Marine Pumps & Valves
  • Cast Iron Components For Marine Pumps & Valves
Cast Iron Components For Marine Pumps & Valves
  • Yaojia
  • china
  • 25 days
  • 3 million tons

Yaojia Trading supplies precision-cast iron components designed specifically for marine pump and valve systems. Our products are manufactured to withstand seawater corrosion, high pressure, and continuous operation in demanding offshore and shipboard environments.

Cast Iron Components for Marine Pumps & Valves – Built for Reliability at Sea

One‍‌‍‍‌ problem we often hear about from marine equipment producers and ship operators

"A pump will just disappear from the public's eyes unless it is broken and then people will be aware of it only in a negative way, that is, they can no longer operate their ships. These pumps operate quietly for days or even weeks at a time, transferring coolant, ballast, fuel, and other materials from one area to another. However, after they have malfunctioned, the consequence to the ship is serious. You can end up losing time because you are unable to sail, you might have to undergo emergency repairs, or if your ship is stuck at sea because of pump failure, then you also need to rush your spare parts suppliers who probably cannot cope with this sudden demand either."

It is the marine equipment producers, the ship operators, and the maintenance personnel who tell us about this kind of issues. They point to pump and valve systems for the problem because they rarely indicate any problems like engines or navigation systems. A single crack or cast piece can bring a whole ship to the ground, costing hundreds if not thousands, in lost time and emergency logistics.

For marine applications, dimensional stability, reliability, and corrosion resistance are just part of the game. They are not negotiable!

Our strategy at Yaojia

We are a company specializing in the development and production of cast iron parts for marine pump and valve systems, that the main factor in our decision making is dimensional accuracy, mechanical strength, consistent long-run, and reliability.

Each piece is designed to withstand the marine environment including exposure to sea water, pressure cycling and continuous operation.

It is not just a casting; it is a component that enables your ship to stay ‍‌‍‍‌afloat.

Marine Valves

Technical specifications

ParameterSpecification
Material gradesGray Iron (ASTM A48 Class 35B/40B), Ductile Iron (ASTM A536 65-45-12/80-55-06), Ni-Resist D-Type
Pressure ratingUp to 25 bar (standard), custom designs up to 40 bar
Corrosion resistanceASTM G48 tested; Ni-Resist grades for severe chloride environments
Casting processShell molding, no-bake resin sand, precision CNC pattern equipment
Dimensional toleranceISO 8062 CT7-CT9; critical bores/seats to CT6
Surface finishAs-cast 12.5μm Ra; machined surfaces 3.2-6.3μm Ra
Coatings & treatmentsEpoxy primer, Xylan coatings, rubber lining (available on request)
Testing & certificationHydrostatic/pneumatic pressure tests, dye penetrant inspection, 3D scanning


Cast‍‌‍‍‌ Components in Fluid Systems in the Marine Field


Marine fluid systems contain various kinds of cast parts which each serve a different purpose and play a different role. Our experience in making these parts has ranged from:

  • Pump casings, volute housings,impellers

  • Bearing supports, seal chambers

  • Valve bodies, valve bonnets, flanges

  • Disc assemblies, actuator mounting brackets

  • Handwheels, stem-support components

We supply parts for newly designed equipment as well as those for repairing old or existing marine systems.


Large-size and heavy-weight Casting


Seldom do all foundries manage big marine components. We check whether the item can be cast in our facility when ‍‌‍‍‌quoting.

ParameterOur capability
Maximum single-piece weightUp to 500 kg (subject to geometry and material)
Maximum overall dimensionApproximately 1,200 mm in diameter or length
Minimum wall thickness5 mm (depending on material and casting method)

These‍‌‍‍‌ should be considered more as broad guidelines rather than as strict regulations. If your part is not covered by these general ranges, do not hesitate to e-mail us a drawing. It is quite possible, for example, that we'll decide it is better to cast it in two parts or that an additional type of mold is needed (if that was ever a problem).

When necessary, we refuse projects. If the project is in our capability, we let you know right away.


Quality control — our 5-step inspection process


Quality assurance of marine valve and pump parts plays a major role. If casting fails during the sea operation, the ship stays moored until the casting is changed and the vessel becomes ready for further use which results in very costly and unanticipated repairs. We conduct regular and systematic quality checks to ensure that each part complies with the drawn specifications prior to ‍‌‍‍‌shipping.

StepInspection stageWhat we checkMethodControl standard
1Incoming material verificationMaterial grade, dimensionsSpectrometer, micrometer100% traceability; dimensions within tolerance
2First-article inspectionFull dimensional check on first partCMM, thread gauges, hardness testerAll features per drawing
3In-process inspectionCritical dimensions, casting qualitySampling, visual inspectionKey features checked per control plan
4Final dimensional inspectionFull dimension checkCMM, profilometer, hardness tester100% critical dimensions verified
5Final visual & documentation reviewSurface finish, coating, packagingVisual inspection, pressure test verificationZero defects; all documentation complete

Basic‍‌‍‍‌ inspection tools: Coordinate Measuring Machine (CMM), hardness tester, spectrometer, thread gauges, hydrostatic/pneumatic pressure-testing devices, dye penetrant inspection

The deliverables at your hands will include: Material certificates, reports on dimensions, CMM data, test results in hardness, pressure test reports, full traceability, customer-specific documentation


Test and certification for marine


Besides the usual testing and certification procedures, we can do the following if needed:

  • Pump casing and valve bodies pressure integrity verification through the means of hydrostatic testing;

  • Identification of surface flaws in important parts by means of dye penetrant testing;

  • Sizes verification on parts of complex shape using 3D scanning;

  • Material certification providing complete melt-to-finished-part traceability.


How we evaluate delivery period for marine items


There are several factors influencing the delivery dates for your marine ‍‌‍‍‌parts:

FactorTypical impact
Tooling availabilityNew tooling: 20–30 days; existing tooling: shorter
Material sourcingNi-Resist/specialty grades may require longer lead times
Machining complexityTight bores, multiple threaded holes, custom flange drilling
Inspection scopeRoutine: 2–3 days; full NDT + surveyor witnessing: +1 week
Coating / lining5–10 days depending on type and curing requirements

Lead time: Standard production: 15–25 working days. Complex geometries or special materials: 25–40 working days. We confirm exact lead time at order placement.

Warranty

We‍‌‍‍‌ are responsible for 12 months from the time of delivery. If a part fails due to manufacturing defects like - Casting defect, machining error, wrong materials - we replace the part or give credit. Wear parts, broken impact part or modified ones from delivery? Not covered.

We give straight answers whether the warranty is applicable or not.

For making claims, you can send us images of the part, the part number, and the order number. After that we will respond within 48 hours.

If a production batch is faulty, we remould the batch keeping all the standards in the original work same, like drawing, material and tolerance.

If you have any questions? About materials, specifications, machining instructions, drawings, etc., we directly respond to you. Never a dead ‍‌‍‍‌end.


Ordering and delivery

To get a quote, send us:

  • 2D drawing, 3D CAD model, or physical sample

  • Material specification and grade

  • Quantity required

  • Pressure rating and testing requirements

  • Machining and surface treatment requirements

  • Inspection or certification requirements

  • Delivery schedule expectations

MOQ: 50 pieces for standard production. Prototype quantities and small batches can be discussed.

Payment: 30% deposit; balance after inspection video confirmation (T/T).

Shipping: FCL or LCL available. Protective packaging and reinforced crates for marine transportation.

Marine Pumps

About Yaojia Trading

Luoyang Yaojia Trading Co., Ltd. has over 20 years of practical experience in casting and metal component manufacturing. The company was founded by Mr. Xi Xianmin, who has more than 25 years of experience in foundry production and engineering management.

Our capabilities:

  • 18,000m² modern production base

  • ~68 employees

  • 16-person R&D team with two senior engineers

  • Annual casting and machining capacity:15,000 tons 

Integrated services:

  • Casting (gray iron, ductile iron, Ni-Resist, and other specified alloys)

  • Multi-axis CNC machining

  • Heat treatment

  • Surface treatment and coating

  • Inspection and CMM

  • Pressure testing and NDT

  • Supply-chain coordination

Customers & markets:

  • Automotive OEM supply (BYD, Chery, Great Wall Motors)

  • Marine equipment

  • Industrial equipment

  • Products exported to South Korea, Japan, USA, Australia, Germany

Exhibition

In May 2024, Yaojia Trading exhibited at the China International Foundry Technology and Equipment Exhibition in Shanghai, showcasing casting accuracy and comprehensive industry-chain service capabilities.

Marine Valves

FAQ

Q1:‍‌‍‍‌ What marine pump and valve components can you produce?

Marine pumps - casings, volute houses & impellers, bearing supports, seal chambers.

Marine Valves - valve bodies, bonnets, flanges, disc assemblies, stem-support, actuator brackets, handwheels.

Q2: What cast iron materials are available for marine application?

You have gray cast iron ASTM A48, cast ductile iron ASTM A536, Ni-Resist Type D for severe chloride environments, other specified alloys on request.

Q3: What is the maximum casting size and weight you can handle?

Single casting up to 500 kg weight and around φ1200/1200 mm dimension.

Q4: Do you provide pressure testing and NDT?

We are able to carry out hydrostatic/pneumatic pressure testing, dye penetrant inspection and 3D scanning if needed.

Q5: Can you produce replacement parts for existing marine installations?

Replacement as well as newly designed parts.

We can accept customer drawings, CAD files or physical samples.

Q6: What coatings and treatments are available?

We offer epoxy primer, Xylan coatings, rubber lining and other finishing as per customer request.

Q7: What information do you need for a quotation?

CAD / drawing file, material, quantity, pressure and testing, machining & surfacing, destination.

Q8: What is your lead time typically?

From our production schedule Standard: 15–25 working days, Complex: 25–40 working days.

Q9:What is your minimum order quantity (MOQ)?& 34;

Our normal production MOQ is 50 pieces. It is possible to discuss smaller orders for prototypes or samples.

Q10: What is your annual production capability?

Approx. 15,000 tons/year in total which includes cast and machine components.

Q11:What kinds of certifications do you provide?

We have material certificates, size reports, hardness testing and other non-destructive testing methods, pressure testing certification and complete lot traceability records.

Q12:Which industries are you serving apart from marine?

Marine, Automotive, Agricultural machinery, Industrial machines, Aftermarket/legacy ‍‌‍‍‌parts.

Four questions to ask any marine casting supplier

  1. What corrosion-resistant materials do you offer for saltwater environments?

  2. What pressure testing and NDT capabilities do you have?

  3. What is your maximum casting size and weight?

  4. Do you have experience with similar marine components?

We have answers ready. Ask us.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right